014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen It keeps the pump in

It keeps the pump in vertical position in order to assure a perfect working

014-1062-030 volgplaat van 310 mm met veer

hydraulic oil

Deze set bestaat uit de pomp

The follower plate is pushed down by the pressurised pneumatic cylinders

014-1065-045 - Follower plate for industrial pumps with shank 45 mm subgroup-Accessoires en losse onderdelen-Pneumatische membraampompen It keeps the pump inIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.